Lo sentimos. Esta página no se ha traducido todavía.

Hydromatik motor hidráulico A6VE 28-160 series 63

go to series 71

 

Hydromatik A6VEThe different sizes (NG) of the A6VE:

A6VE 28
A6VE 55
A6VE 80
A6VE 107
A6VE 140
A6VE 160
 

The different control devices of the Hydromatik hydraulic motor A6VE 28 - 160 at a glance:

Control, pilot-pressure related
HD1 = steuerdruckabhängig, Δp = 10 bar
HD2 = steuerdruckabhängig, Δp = 25 bar

Hydraulic two-point control
HZ1 = Size 28 + 140 – 200
HZ3 = Size 55 - 107

Electric control, proportional
EP1 = U = 12 V
EP2 = U = 24 V

Electric two-point control
EZ1 = U = 12 V for size 28 + 140 - 200
EZ2 = U = 24 V for size 28 + 140 - 200
EZ3 = U = 12 V for size 55 - 107
EZ4 = U = 24 V for size 55 - 107

Automatic control, high-pressure related
HA1 = Without pressure increase
HA2 = With pressure increase, Δp = 100 bar
HA3 = Without pressure increase

hydraulic control, speed related
DA3 = pSt  / pHD = 5/100, electric travel direction valve + electric Vg max – control 24 V

 

Ordering code example:
A6V | E | 80 | HD1 | D | 63 | W | V | A | L | 020

 

Ordering code for standard program:

A6V = Axial piston unit
E = Mode of operation
80 = Size
HD1 = Control device
D = Pressure control ( only for HD, EP )
63 = Series
W = Direction of rotation
V = Seals
A = Shaft end
L = Mounting flange
020 = Ports for service lines

 

Hydromatik hydraulic motor A6VE - series 71

go to series 63

 

The different sizes (NG) of the Hydromatik hydraulic motor A6VE:

A6VE 60
A6VE 85
A6VE 115
A6VE 170  

 

The different control devices of the Hydromatik hydraulic motor A6VE 60 -170 at a glance:

Proportional control hydraulic
HP1 = Positive control, ΔpST = 10 bar
HP2 = Positive control, ΔpST = 25 bar
HP5 = Negative control, ΔpST = 10 bar
HP6 = Negative control, ΔpST = 25 bar

Proportional control electric
EP1 = Positive control, U = 12 V
EP2 = Positive control, U = 24 V
EP5 = Negative control, U = 12 V
EP6 = Negative control, U = 24 V

Two-point control hydraulic
HZ5 = Negative control
HZ7 = Negative control

Two-point control electric
EZ5 = Negative control, U = 12 V
EZ6 = Negative control, U = 24 V
EZ7 = Negative control, U = 12 V
EZ8 = Negative control, U = 24 V

Automatic control high-pressure related, positive control
HA1 = with minimum pressure increase, Δp ≤ ca. 10 bar
HA2 = with pressure increase, Δp = 100 bar
HA3 = with minimum pressure increase, Δp ≤ ca. 10 bar


Ordering code example:
A6V | E | 85 | HP1 | 00 | 0 | 0 | 0 | 0 | A | 71 | M | W | V | 0 | Y2 | Z9 | 6 | B | U | Y


Ordering code for standard program:
A6V = Axial piston unit
E = Mode of operation
85 = Size
HP1 = Control device
00 = Pressure control / override
0 = Connector for solenoids
0 = Additional function 1
0 = Additional function 2
0 = Response time damping
A = Setting range for displacement
71 = Series
M = Configuration of ports and fastening threads
W = Direction of rotation
V = Seals
0 = Drive shaft bearing
Y2 = Mounting flange
Z9 = Drive shaft
6 = Port plate for service lines
B = Valves
U = Speed sensor
Y = Standard- / special version

 

We would be pleased to maintain your hydraulic units.


Kastaun

Sascha Kastaun,
Ventas internacionales

Teléfono:
+49 201.8 58 13-27
E-Mail: kastaun@hk-hydraulik.de
Formulario de contacto

Langenberger Str. 436
D - 45277 Essen
Germany/Alemania

 

 

Um Ihnen ein optimales Nutzererlebnis zu bieten, verwenden wir technisch erforderliche Cookies. Durch Nutzung unserer Internetseiten erklären Sie sich damit einverstanden.

Unsere Datenschutzerklärung finden Sie hier.