Lo sentimos. Esta página no se ha traducido todavía.

Hydromatik bomba hidráulica A11VO 40 - 260 serie 10

 

The different sizes of the Hydromatik hydraulic pump A11VO 40 - 260 at a glance:

  • A11VO 40
  • A11VO 60
  • A11VO 75
  • A11VO 95
  • A11VO 130
  • A11VO 145
  • A11VO 190
  • A11VO 260

 

The different control devices of the Hydromatik hydraulic pump A11VO:

LR = Power Control

Power Control with override:
LR.C = cross Sensing, negativ
LR3 = high-pressure related, negative
LG1 = pilot-pressure related, negative
LG2 = pilot-pressure related, positive
LE1 = electric, U = 12 V, negativ
LE2 = electric, U = 24 V, negativ

Power Control with pressure cut-off:
L.D.. = Power Control with pressure cut-off
L.E.. = Power Control with pressure cut-off hydraulic 2-stage
L..G. = Power Control with pressure cut-off hydraulic, remote controlled

Power Control with load sensing:
L…S = Power Control with load sensing
L…S2 = Power Control with load sensing elektric prop. override, 24 V
L…S5 = Power Control with load sensing hydraulic, remote conrolled

Power Control with stroke limiter:
L…H1 = negative characteristic, ∆p = 25 bar
L…H5 = negative characteristic, ∆p = 10 bar
L…H2 = positive characteristic, ∆p = 25 bar
L…H6 = positive characteristic, ∆p = 10 bar
L…U1 = positive characteristic, U = 12 V
L…U2 = positive characteristic, U = 24 V

Pressure Control:
DR = Pressure Control
DRS = Pressure Control with load sensing
DRG = Pressure Control remote controlled
DRL = Pressure Control for parallel operation

Hydraulic control, pilot-pressure related:
HD1 = (positive characteristic), ∆p = 10 bar
HD2 = (positive characteristic), ∆p = 25 bar
HD.D = with pressure cut-off
HD.G = with pressure cut-off, remote controlled

Electric control, with proportional solenoid:
EP1 = (positive characteristic), U = 12 V
EP2 = (positive characteristic), U = 24 V
EP.D = with pressure cut-off
EP.G = with pressure cut-off, remote control

 

Ordering code example:

A11V | O | 40 | LR | 1 | 0 | R | N | Z | C |12 |N00 | P

 

Ordering code for standard program:

A11V = Axial piston unit
O = Operation
40 = Size
LR = Control unit
1 = Series
0 = Index
R = Direction of rotation
N = Seals
Z = Shaft end
C = Mounting flange
12 = Service line ports
N00 = Through drive

 


Kastaun

Sascha Kastaun,
Ventas internacionales

Teléfono:
+49 201.8 58 13-27
E-Mail: kastaun@hk-hydraulik.de
Formulario de contacto

Langenberger Str. 436
D - 45277 Essen
Germany/Alemania

 

 

Um Ihnen ein optimales Nutzererlebnis zu bieten, verwenden wir technisch erforderliche Cookies. Durch Nutzung unserer Internetseiten erklären Sie sich damit einverstanden.

Unsere Datenschutzerklärung finden Sie hier.