Lo sentimos. Esta página no se ha traducido todavía.
Brueninghaus motor hidráulico A6VM 250 - 1000 serie 63
The different sizes of the Brueninghaus hydraulic motor A6VM:
A6VM 250
A6VM 355
A6VM 500
A6VM 1000
The different control devices of the Brueninghaus hydraulic motor A6VM 250 - 1000 at a glance:
HD1 = Hydraulic control, pilot pressure dependent, ∆p = 10 bar
HD2 = Hydraulic control, pilot pressure dependent, ∆p = 25 bar
HD3 = Hydraulic control, pilot pressure dependent, ∆p = 35 bar
HZ = Hydraulic two-point control
EP1 = Electric control, proportional, 12 V
EP2 = Electric control, proportional, 24 V
EZ1 = Electric two-point control, 12 V
EZ2 = Electric two-point control, 24 V
HA1 = Automatic control, high-pressure related, without pressure increase
HA2 = Automatic control, high-pressure related, with pressure increase ∆p = 100 bar
DA = Hydraulic control, speed related, pSt / pHD = 3/100, hydraulic travel direction valve
Ordering code example:
A6V | M | 250 | HD1 | 63 | W | V | Z | B | 010 | B
Ordering code for standard program:
A6V = Axial piston unit
M = Operation mode
250 = Size
HD1 = Control device
63 = Series
W = Direction of rotation
V = Seals
Z = Shaft end
B = Mounting flange
010 = Service line ports
B = Start of control