Lo sentimos. Esta página no se ha traducido todavía.

Brueninghaus bomba de pistones axiales A10VSO 18 - 140 serie 31

 Go to series 52/53

 

The different sizes of the Brueninghaus hydraulic pump A10VSO:

  • A10VSO 18
  • A10VSO 28
  • A10VSO 45
  • A10VSO 71
  • A10VSO 100
  • A10VSO 140

 

The different control devices of the Brueninghaus hydraulic pump A10VSO series 31 18 - 140 at a glance:

DG = Two-point control, directly operated
DR = Pressure control
DFR = Pressure control with flow control, hydraulic, X – T open
DFR1 = Pressure control with flow control, hydraulic, X – T closed
FE1 = Pressure control with swivel angle control, electric
DFE1 = Pressure control pressure and swivel-angle control, electric
DRG = Pressure control with pressure cut-off, remotely operated, hydraulic
ED71 = Pressure contr. w. pressure cut-off, remotely operated, electrical, negative characteristic 12 V
ED72 = Pressure contr. w. pressure cut-off, remotely operated, electrical, negative characteristic 24 V
ER71 = Pressure contr. w. pressure cut-off, remotely operated, electrical, positive characteristic 12 V
ER72 = Pressure contr. w. pressure cut-off, remotely operated, electrical, positive characteristic 24 V
DFLR = Pressure, flow and power control

 

Ordering code example:

A10VS | O | 28 | DG | 30 | R | V | S | A | 12 | N00

 

Ordering code for standard program:

A10V = axial piston unit / type of hydraulic pump
O = Operation mode
28 = Size
DG = Control device
31 = Series
R = Direction of rotation
V = Seals
S = Drive shaft
A = Mounting flange
12 = Service line port
N00 = Through drive

 

Brueninghaus axial piston pump A10VSO 10 serie 52/53

Go to series 31

 

The different control devices of the Brueninghaus hydraulic pump A10VSO 10 series 52 / 53 at a glance:

DR = Pressure control
DFR = Pressure control with flow control, hydraulic, X - T open
DFR1 = Pressure control with flow control, hydraulic, X - T closed
DRG = Remote-controlled pressure regulator with pressure cut-off, hydraulic

 

Ordering code example:

A10VS | O | 10 | DR | 52 | R | V | S | A | 14 | N00

 

Ordering code for standard program:

A10VS = axial piston unit / type of hydraulic pump
O = Operation mode
10 = Size
DR = Control device
52 = Series
R = Direction of rotation
V = Seals
S = Drive shaft
A = Mounting flange
14 = Service line port
N00 = no Through drive

 

We would be pleased to maintain your hydraulic units.


Kastaun

Sascha Kastaun,
Ventas internacionales

Teléfono:
+49 201.8 58 13-27
E-Mail: kastaun@hk-hydraulik.de
Formulario de contacto

Langenberger Str. 436
D - 45277 Essen
Germany/Alemania