Lo sentimos. Esta página no se ha traducido todavía.
Hydromatik A4VG 28 - 250 bomba hidráulica serie 32
All sizes of the Hydromatik hydraulic pump A4VG at a glance:
- A4VG 28
- A4VG 40
- A4VG 56
- A4VG 71
- A4VG 90
- A4VG 125
- A4VG 180
- A4VG 250
The different control devices of the Hydromatik hydraulic pump A4VG at a glance:
Without control unit
NV = no control unit
Hydraulic control:
HD3 = pilot-pressure related with supply filtration
HW = mechanical servo
DG = directly operated
DA1 = speed related (Description DA control valve in Pos. 09) U = 12 V DC
DA2 = speed related (Description DA control valve in Pos. 09) U = 24 V DC
Electric control:
EP3 = with proportional solenoid, U = 12 V DC
EP4 = with supply filtration, U = 24 V DC
EZ1 = with switching solenoid, U = 12 V DC
EZ2 = with switching solenoid, U = 24 V DC
Ordering code example:
A4V | G | 28 | NV | D | 1 | 32 | R | N | Z | C | 10 | N00
Ordering code for standard program:
A4V = Axial piston unit
G = Operation mode
28 = Size
NV = Control device
D = Pressure cut-off
1 = DA control valve
32 = Series
R = Direction of rotation
N = Seals
Z = Shaft end
C = Mounting flange
10 = Service line ports
N00 = Boost pump
Hydromatik hydraulic pump A4VG 045 - 280, series 40
All sizes of the Hydromatik hydraulic pump A4VG at a glance:
- A4VG 045
- A4VG 065
- A4VG 085
- A4VG 110
- A4VG 145
- A4VG 175
- A4VG 210
- A4VG 280
The different control devices of the Hydromatik hydraulic pump A4VG series 40 at a glance:
Proportional control, hydraulic:
HP1 = pilot pressure related, p = 6-18 bar
HW2 = mechanical servo, hexagon shaft with lever, free position
HW8 = mechanical servo, hexagon shaft with lever, free position with neutral position switch
Proportional control, electric:
EP1, U = 12 V
EP2, U = 24 V
Two-Point control, electric:
EZ1, U = 12 V
EZ2, U = 24 V
Automatic control, speed related:
DA1, U = 12 V
DA2, U = 24 V
Hydraulic control, direct controlled:
HT1
Electric control, direct controlled, with one pressure reducing valve (DER) and 4/3-direcional valve:
EV1, U = 12 V
EV2, U = 24 V
Ordering code example:
A4V | G | 045 | HW2 | 0 |0 |0 |0 |0 | 40 | M | R | N | B2 | S7 | 1
Ordering code for standard program:
A4V = Axial piston unit
G = Operation mode
045 = Size
HW2 = Control device
0 = Pressure cut-off
0 = Connector for solenoids
0 = Swivel angle sensor
0 = Additional functions
0 = DA-control valve
40 = series
M = Configuration of ports and fastening threads
R = Direction of rotation
N = Seals
B2 = Mounting flanges
S7 = Drive shafts
1 = Service line ports
We would be pleased to maintain your hydraulic units.
