Scuze. Aceasta pagina nu a fost tradus.

Hydromatik pompe hidraulice A11VLO 130 - 260 serie 10

Go to serie 40

 

The different sizes of the Hydromatik hydraulic pump A11VLO 130 - 260 at a glance:

  • A11VLO 130
  • A11VLO 145
  • A11VLO 190
  • A11VLO 260

 

The different control devices of the Hydromatik hydraulic pump A11VLO:

LR = Power Control

Power Control with override:
LR.C = cross Sensing, negativ
LR3 = high-pressure related, negative
LG1 = pilot-pressure related, negative
LG2 = pilot-pressure related, positive
LE1 = electric, U = 12 V, negativ
LE2 = electric, U = 24 V, negativ

Power Control with pressure cut-off:
L.D.. = Power Control with pressure cut-off
L.E.. = Power Control with pressure cut-off hydraulic 2-stage
L..G. = Power Control with pressure cut-off hydraulic, remote controlled

Power Control with load sensing:
L…S = Power Control with load sensing
L…S2 = Power Control with load sensing elektric prop. override, 24 V
L…S5 = Power Control with load sensing hydraulic, remote conrolled

Power Control with stroke limiter:
L…H1 = negative characteristic, ∆p = 25 bar
L…H5 = negative characteristic, ∆p = 10 bar
L…H2 = positive characteristic, ∆p = 25 bar
L…H6 = positive characteristic, ∆p = 10 bar
L…U1 = positive characteristic, U = 12 V
L…U2 = positive characteristic, U = 24 V

Pressure Control:
DR = Pressure Control
DRS = Pressure Control with load sensing
DRG = Pressure Control remote controlled
DRL = Pressure Control for parallel operation

Hydraulic control, pilot-pressure related:
HD1 = (positive characteristic), ∆p = 10 bar
HD2 = (positive characteristic), ∆p = 25 bar
HD.D = with pressure cut-off
HD.G = with pressure cut-off, remote controlled

Electric control, with proportional solenoid:
EP1 = (positive characteristic), U = 12 V
EP2 = (positive characteristic), U = 24 V
EP.D = with pressure cut-off
EP.G = with pressure cut-off, remote control

 

Ordering code example:

A11V | L | O | 130 | LR | 1 | 0 | R | N | Z | D | 12 | N00 | P

 

Ordering code for standard program:

A11V = Axial piston unit
L = Charge pump (impeller)
O = Operation
130 = Size
LR = Control unit
1 = Series
0 = Index
R = Direction of rotation
N = Seals
Z = Shaft end
D = Mounting flange
12 = Service line ports
N00 = Through drive

 

Hydromatik Hydraulikpumpe A11VLO 145 - 280 serie 40

Go to serie 10

 

The different sizes of the Hydromatik hydraulic pump A11VLO 145 - 280 at a glance:

  • A11VLO 145
  • A11VLO 175
  • A11VLO 210
  • A11VLO 280

 

The different control devices of the Hydromatik hydraulic pump A11VLO 145 - 280:

LR = Power controller, fixed setting

Power controller with electric-proportional override:
L3 = negative characteristic, U = 12 V
L4 = negative characteristic, U = 24 V

Summation power controller with hydraulic -proportional override, high pressure, negativec characteristic:
CR = with stop
PR = without stop

Stroke control:
E1 = electric-proportional, positive characteristic, U = 12 V
E2 = electric-proportional, positive characteristic, U = 24 V
H3 = hydraulic proportional, pilot pressure, negative characteristic, ∆p = 25 bar
H4 = hydraulicproportional, pilot pressure, positive characteristic, ∆p = 25 bar

Pressure controller:
DR = with one-side swiveling, fixed setting

 

Ordering code example:

A11V | LO | 145 | LR | DR | E1 | S0 | A | 0 | 0 | 40 | M | R | V | D4 | T1 | 1 | E | U000 | 0 | 0

 

Ordering code for standard program:

A11V = axial piston pump
LO = operation mode
145 = size
LR = controller
DR = additional controller: pressure controller
E1 = additional controller: stroke control
S0 = additional controller: load sensing
A = without external control pressure supply (standard for power and pressure controllers)
0 = without solenoid connector
0 = without swivel angle sensor
40 = series
M = metric  port threads with O-ring seal
R = direction of rotation
V = seals
D4 = mounting flanges
T1 = drive shafts
1 = service line ports
E = rotary group versions
U000 = Through drives
0 = sensors
0 = Standard-/special version

 

We would be pleased to maintain your hydraulic units!


Kastaun
Sascha Kastaun,
Vânzări Internationale

Telefon: +49 201.8 58 13-27
E-Mail: kastaun@hk-hydraulik.de
Contact

Langenberger Str. 436
45277 Essen
Germany

 

 

Um Ihnen ein optimales Nutzererlebnis zu bieten, verwenden wir technisch erforderliche Cookies. Durch Nutzung unserer Internetseiten erklären Sie sich damit einverstanden.

Unsere Datenschutzerklärung finden Sie hier.