Scuze. Aceasta pagina nu a fost tradus.

Hydromatik motoare hidraulice A6VM 28-200, serie 63

Go to series 71

 

The different sizes (NG) of the Hydromatik hydraulic motor A6VM:

A6VM 28
A6VM 55
A6VM 80
A6VM 107
A6VM 140
A6VM 160
A6VM 200

 

The different control devices of the Hydromatik hydraulic motor A6VM 28-200 at a glance:

Hydraulic control, pilot-pressure dependent
HD1 = pilot pressure dependent, Δp = 10 bar
HD2 = pilot pressure dependent, Δp = 25 bar
HD3 = pilot pressure dependent, Δp = 35 bar

Hydraulic two-point control
HZ1 = Size 28 + 140 – 200
HZ3 = Size 55 - 107

Electric control, proportional
EP1 = U = 12 V
EP2 = U = 24 V

Electric two-point control
EZ1 = U = 12 V for size 28 + 140 - 200
EZ2 = U = 24 V for size 28 + 140 - 200
EZ3 = U = 12 V for size 55 - 107
EZ4 = U = 24 V for size 55 - 107

Automatic control, high-pressure related
HA1 = Without pressure increase
HA2 = With pressure increase, Δp = 100 bar

Hydraulic control, speed related
DA1 = pSt  / pHD = 5/100, hydraulic travel direction valve
DA2 = pSt  / pHD = 5/100, electric travel direction valve + electric Vg max – control 12 V
DA3 = pSt  / pHD = 5/100, electric travel direction valve + electric Vg max – control 24 V
DA4 = pSt  / pHD = 8/100, hydraulic travel direction valve
DA5 = pSt  / pHD = 8/100, electric travel direction valve + electric Vg max – control 12 V
DA6 = pSt  / pHD = 8/100, electric travel direction valve + electric Vg max – control 24 V

 

Ordering code example:
A6V | M | 80 | HD1 | D | 63 | W | V | A | B | 020 | D | B

 

Ordering code for standard program:

A6V = Axial piston unit
M = Mode of operation
80 = Size
HD1 = Control device
D = Pressure control ( only for HD, EP )
63 = Series
W = Direction of rotation
V = Seals
A = Shaft end
B = Mounting flange
020 = Ports for service lines
D = Speed measurement
B = Start of control

 

 

Hydromatik Motoare hidraulice A6VM 060-215, serie 71

Go to series 63

 

The different sizes (NG) of the Hydromatik hydraulic motor A6VM 060 - 215:

A6VM 060
A6VM 085
A6VM 115
A6VM 150
A6VM 170
A6VM 215

 

The different control devices of the Hydromatik hydraulic motor A6VM 060 - 215 at a glance:

Proportional control, hydraulic
HP1 = positive control, Δpst = 10 bar
HP2 = positive control, Δpst = 25 bar
HP5 = negative control, Δpst = 10 ba
HP6 = negative control, Δpst = 25 bar

Proportional control, electric
EP1 = positive control, U = 12 V
EP2 = positive control, U = 24 V
EP5 = negative control, U = 12 V
EP6 = negative control, U = 24 V

Two-point-control, hydraulic
HZ5 = negative control, for sizes 060 - 115
HZ7 = negative control, for sizes 150 - 215

Two-point-control, electric
EZ5 = negative control, U = 12 V, for sizes 150 - 215
EZ6 = negative control, U = 24 V, for sizes 150 - 215
EZ7 = negative control, U = 12 V, for sizes 060 - 115
EZ8 = negative control, U = 24 V, for sizes 060 - 115

Automatic control, high-pressure related, positive control
HA1 = with minimum pressure increase, Δp ≤ ca. 10 bar
HA2 = with pressure increase, Δp = 100 bar

Automatic control, speed-related, negative control, pst/pHD = 5/100
DA0 = hydrauliv travel direction valve
DA1 = electric travel direction valve + electric Vg max – circuit, U = 12 V
DA2 = electric travel direction valve + electric Vg max – circuit, U = 24 V

 

Ordering code example:
A6V | M | 060 | HP1 | 00 | 0 | 0 | 0 | 0 | A | 71 | M | W | V | O | M4

 

Ordering code for standard program:

A6V = axial piston pump
M = operating mode
060 = sizes
HP1 = control devices
00 = pressure control / overrides
0 = connector for solenoids
0 = additional function 1
0 = additional function 2
0 = response time damping
A = setting ranges
71 = series
M = configutation of ports and fastening threads
W = direction of rotation
V = seals
O = drive shaft bearing
M4 = mounting flanges

 

We would be pleased to maintain your hydraulic units.

 


Kastaun
Sascha Kastaun,
Vânzări Internationale

Telefon: +49 201.8 58 13-27
Contact

Langenberger Str. 436
45277 Essen
Germany

 

 

Companie certificată EN ISO 9001