Hydromatik hydraulic motor A6VE 28-160 series 63
The different sizes (NG) of the A6VE:
A6VE 28
A6VE 55
A6VE 80
A6VE 107
A6VE 140
A6VE 160
The different control devices of the Hydromatik hydraulicThe use of liquids to transmit force and energy. motor A6VE 28-160 at a glance:
Control, pilot-pressure related
HD1 = pilot pressure dependent, Δp = 10 bar
HD2 = pilot pressure dependent,, Δp = 25 bar
Hydraulic two-point control
HZ1 = Size 28 + 140 – 200
HZ3 = Size 55 - 107
Electric control, proportional
EP1 = U = 12 V
EP2 = U = 24 V
Electric two-point control
EZ1 = U = 12 V for size 28 + 140 - 200
EZ2 = U = 24 V for size 28 + 140 - 200
EZ3 = U = 12 V for size 55 - 107
EZ4 = U = 24 V for size 55 - 107
Automatic control, high-pressure related
HA1 = Without pressure increase
HA2 = With pressure increase, Δp = 100 bar
HA3 = Without pressure increase
hydraulic control, speed related
DA3 = pSt / pHD = 5/100, electric travel direction valve + electric Vg max – control 24 V
Ordering code example:
A6V | E | 80 | HD1 | D | 63 | W | V | A | L | 020
Ordering code for standard program:
A6V = Axial piston unit
E = Mode of operation
80 = Size
HD1 = Control device
D = Pressure control ( only for HD, EP )
63 = Series
W = Direction of rotation
V = Seals
A = Shaft end
L = Mounting flange
020 = Ports for service lines
Hydromatik hydraulic motor A6VE - series 71
The different sizes (NG) of the Hydromatik hydraulic motor A6VE:
A6VE 60
A6VE 85
A6VE 115
A6VE 170
The different control devices of the Hydromatik hydraulic motor A6VE 60 -170 at a glance:
Proportional control hydraulic
HP1 = Positive control, ΔpST = 10 bar
HP2 = Positive control, ΔpST = 25 bar
HP5 = Negative control, ΔpST = 10 bar
HP6 = Negative control, ΔpST = 25 bar
Proportional control electric
EP1 = Positive control, U = 12 V
EP2 = Positive control, U = 24 V
EP5 = Negative control, U = 12 V
EP6 = Negative control, U = 24 V
Two-point control hydraulic
HZ5 = Negative control
HZ7 = Negative control
Two-point control electric
EZ5 = Negative control, U = 12 V
EZ6 = Negative control, U = 24 V
EZ7 = Negative control, U = 12 V
EZ8 = Negative control, U = 24 V
Automatic control high-pressure related, positive control
HA1 = with minimum pressure increase, Δp ≤ ca. 10 bar
HA2 = with pressure increase, Δp = 100 bar
HA3 = with minimum pressure increase, Δp ≤ ca. 10 bar
Ordering code example:
A6V | E | 85 | HP1 | 00 | 0 | 0 | 0 | 0 | A | 71 | M | W | V | 0 | Y2 | Z9 | 6 | B | U | Y
Ordering code for standard program:
A6V = Axial piston unit
E = Mode of operation
85 = Size
HP1 = Control device
00 = Pressure control / override
0 = Connector for solenoids
0 = Additional function 1
0 = Additional function 2
0 = Response time damping
A = Setting range for displacement
71 = Series
M = Configuration of ports and fastening threads
W = Direction of rotation
V = Seals
0 = Drive shaft bearing
Y2 = Mounting flange
Z9 = Drive shaft
6 = Port plate for service lines
B = Valves
U = Speed sensor
Y = Standard- / special version
We would be pleased to maintain your hydraulic units.